G.T. Fieros

I'll go through my parts, but won't be much that I can bring along. Might bring some funny 'paper' though to take some of those parts home.
I've got a few interior pieces, but nothing special.

Jer - I was asked about the Fiero today, and if I knew you.. from Alex. You're in the same business, and I'm his IT guy.

20th seems to be the day... This Saturday at 115 Cityview Dr, Etobicoke

1. Jeremy aka coppertop
2. Adam : x-thumpr-x
3. Ryan: Ry86GT
4. Cam: netcam
5. Steve: sargeants
6.
7.
8.
9.
10.

What time are we looking at? I'm not much of a morning person...
(was about to post a link to my for sale thread (my list of stuff) on the old forum and the first post containing all the info is gone )

Adam, I could use your Gas door release, if that's the "fuel door release handle on the pillar on the inside of the car" as per: viewtopic.php?f=9&t=127 and if its in good condition. Not sure when I'm going to see Mike.

1. Jeremy aka coppertop
2. Adam : x-thumpr-x
3. Ryan: Ry86GT
4. Cam: netcam
5. Steve: sargeants
6. Steve: bnevets27
7.
8.
9.
10.

I will be there.
Dorai <><

Sergeants is correct, 20th which is this Saturday, 115 cityview dr, etobicoke (hwy27 and bel field area, close to 401 and Dixon) park in the lot behind the building. Start time I will be there early, but if people show up for 9ish, we are trying to wrap this up by noon.

Sargeants, I know a couple people named Alex, does he work for Kone?

Jer

Here's a list of what I have so far. I will update this when I have time again over the next night or two to go through the rest.

What I will keep at home unless someone is interested:
- Fastback rear decklid complete with spoiler. Will sell the complete package or just the spoiler separate. Good condition, no physical damage I can find, but it will need paint for sure. The lid has the lock/actuator assembly in it and I believe the wiring harness is in it as well.

What I am bringing along:
- front and rear valve covers (need refinished)
- non-engraved upper plenum (needs refinished)
- middle intake
- V6 throttle body (will need cleaned up, no sensors)
- fuel rail (with fuel block and FPR still on it. Unkown condition of FPR)
- cold start injector with hard line
- Set of tail light screws (for a notchie)
- Set of palstic tail light screw covers
- Passenger side rear fastback side marker. Will bring the driver side as well, but be prepared it's broken on the wheel end of it.
- Stock V6 dog bone - good bushings
- V6 y-pipe and coil heat shields (need cleaned up)
- BNIB aux coolant temp gauge sensor (was going to replace the ECM one over the winter and ordered the wrong one)
- BNIB charcoal canister air filter (never ended up installing it)
- Stock height un-modified manual shifter lever
- What I believe is a CRX intake pipe with fittings to fit the Fiero - was in my car when I bought it but I re-installed the stock one.
- other various small bits and pieces.

No real prices on anything, anything to help pay for my gas for the day or for a new VSS. Would trade for parts I know I need or if there's anything I find that I haven't thought of.

Parts I know I need/want:
- Old style V6 dogbone (the one with the external rib)
- Little metal brackets that support the rear of the coolant tubes - mine is pretty well rusted through on the drivers side.
- Outer dew strips
- Fastback deck lid with no holes / no spoiler

Parts I've found and will be picking up tomorrow:
- VSS for manual tranny! Thanks Adam

_________________
Ryan - 86 GT

1. Jeremy aka coppertop
2. Adam : x-thumpr-x
3. Ryan: Ry86GT
4. Cam: netcam
5. Steve: sargeants
6. Steve: bnevets27
7. Dorai
8.
9.
10.

I added Dorai to the list. Sorry - don't know your real name. Anyone else going to make it?

_________________
Ryan - 86 GT

you've got it correct. The last name is Isaac.

Will be going through my parts tonight to see what I don't need/want to keep
And figure out what I am needing to get.... looking like Adams got a few things I'll need/want

If anyone has a 30mm axle nut socket for sale/trade/loan I would be appreciative. CTire doesn't seem to carry a deep 30mm.
Haven't checked Princess Auto or Napa (not easy to get to).

Jer - That'd be the Alex. Guess he stopped by the shop earlier and saw your Fierion

I have one I can LOAN I picked mine up at the pickering flea market.

_________________
Forum Admin
87 GT 3400 Green
88T-top: WIP

Alex used to work at MAD fixtures

Jer

I'm up heading to storage unit to load up everything shortly, we should be there by 10am.

_________________
Forum Admin
87 GT 3400 Green
88T-top: WIP

c u all soon; dress warm; we got ^%$# snow!

i love this country.

Thanks for coming out guys, even though the weather was cold, windy with the odd snow storm. It was good to see all the familiar faces and the new faces, can't wait for the first cruise.

Jer

Thanks for having us out at your p[lace.
Dorai <><

Yep, was nice to meet a few people.

Just for the record, I did get my buddy's engine in the back of the truck too on the way home. It just got buried in Fiero bits and couldn't even be seen (it was only a 1000cc Mini engine)

_________________
Ryan - 86 GT