G.T. Fieros
http://www.gtfieros.com/phpBB3/

Ground to fender lip measurement
http://www.gtfieros.com/phpBB3/viewtopic.php?f=6&t=1083
Page 1 of 1

Author:  BigB [ Wed May 30, 2018 6:06 pm ]
Post subject:  Ground to fender lip measurement

I ordered some 1" ball joints from Rodney earlier this week. I always thought Blu was a little high in the front. I have a slight grade on my driveway so always suspected that it was just the weight transfer. Moved into the garage, I came up with some interesting measurements.

Left side, 27" front and back
Right side ... 27.5" front and back

So my new ball joints will drop the front which will give me a slightly more solid stance, but the left-right deviation is rather odd.

Chime in and post your measurements. Curious as to whether this is normal, or the previous owner weighed 600lbs and liked to turn right a lot ... :). Maybe it's just time for new springs (which is to say I just wasted some coin!).

Author:  exST165 [ Thu May 31, 2018 8:01 am ]
Post subject:  Re: Ground to fender lip measurement

Sorry I can’t be much help

Image

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/