G.T. Fieros http://www.gtfieros.com/phpBB3/ |
|
GT Quarter Panel Window Installation http://www.gtfieros.com/phpBB3/viewtopic.php?f=6&t=868 |
Page 1 of 1 |
Author: | BigB [ Thu Jun 23, 2016 1:04 pm ] |
Post subject: | GT Quarter Panel Window Installation |
I'm at a 2x installation on Blu. Using the 2-sided tape, the driver's side front top lip keeps pulling away. Rather this time round on the whole guitar-wire take off procedure, I was thinking of maybe trying out something like PL Caulking. Any thoughts or recommendations? |
Author: | x-thumpr-x [ Thu Jun 23, 2016 5:37 pm ] |
Post subject: | Re: GT Quarter Panel Window Installation |
did you use the proper 3m tape? Mine hasn't come off since it's been installed. |
Author: | Darn cars [ Thu Jun 23, 2016 9:36 pm ] |
Post subject: | Re: GT Quarter Panel Window Installation |
You can use a tube of the windshield adhesive think it is called Butyl or some thing like that but it is a permanent adhesive not some thing you can easily remove down the road I used it on a fast back years ago that had the scoops in that location |
Author: | BigB [ Fri Jun 24, 2016 1:33 am ] |
Post subject: | Re: GT Quarter Panel Window Installation |
x-thumpr-x wrote: did you use the proper 3m tape? Mine hasn't come off since it's been installed. #1 lasted 3 years. It came up in the top left corner and eventually the driver window caught the edge and cracked it. #2 replacement lasted 2 months before it started to part ways with the frame in the exact same place. I made sure was all the existing tape was removed and cleaned beforehand. Not sure why the trouble in the exact same location. There is though a lot of wind in that area so if it is going to pull away, that would be where. |
Author: | cam-a-lot [ Fri Jul 01, 2016 11:03 am ] |
Post subject: | Re: GT Quarter Panel Window Installation |
I have a set of NOS GT quarter windows as well... but I am terrified of mounting them since it seems so easy to do it wrong and have them fly off. I am pretty sure I would never be able to find another OEM set. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |