G.T. Fieros

Greater Toronto Fieros
It is currently Sat Dec 04, 2021 3:42 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: 88 GT rebuild
PostPosted: Tue May 21, 2013 6:37 pm 
Offline
wannabe

Joined: Fri Mar 22, 2013 12:00 am
Posts: 53
Just want to post pictures of my 1988 GT I picked up just around the corner from my parents in Flamborough near highway 6. In all honesty I think I got a great deal at 850$ American Car (but 2nd generation Canadian) -
- 120,000 miles, 5spd.
- Very little rust in rails, none in trunk.
- poor paint. Body panels in good shape, but a little cosmetic fixing needed.
- Several body modifications (chin spoiler I really like, trunk scoop is okay, cut out air dam in front I dont care of but want to keep the 88 panels with the serial numbers so I will live with it. Other cheesy modifications removed (rubber skirting along sides.. ugh).
- Drivers side inner door panel in rough shape, no carpet, no headliner/backer
- No spare tire
- Fancy lithium racing battery (Small, I dident actually care for it, so I replaced it, but worth a few hundred $). Located up front but PO did a good job with electrical.
- several beechwood interior pieces painted black. Slowly replacing
- Rear quarter panels windows missing.
- car HAD A/C , but everything is disconnected in the back. Thinking about removing the entire thing to save weight?


Things I had to do to certify/etest it :

- Headlights were stuck down. Quick rebuild kit from Rodney took care of that
- Tires were shot, I took the opportunity to get something a little more tasteful
- Rear drivers side caliper was stuck. Got a rebuild, and took the opportunity to replace the rotors on the rear and of course the pads. Previous owner had put on SS lines, so left those in tact.
- Passed first emissions test. Replaced cat (Which clunked when I banged on it) with cheapie canadian tire replacement. Poorly clamped on, but it did the job and I passed easily :)

That was it for what was required.

Other modifications I have done.

- purchased rear quarter windows from Ebay.
- Found some carpet and headliner (yet to install headliner)
- "Led"ed all side markers
- Flush front signal covers from PPF
- "Led"ed all interior lights
- Rodney front battery tray installed
- front fender vents from PPF (yet to be installed)
- New wires/plugs/rotor/cap/timing
- Dropped fuel tank to fix inaccurate fuel gauge
- Replaced Alt. as it died on me after a few months (grrr)..
- Replaced entire exhaust from downpipe back with 2.5 from ebay. Its not a perfect fit on an 88, a few customizations where required. http://www.ebay.ca/itm/380361502042?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
- while I had the exhaust removed I replaced the starter with a lightly used one (Existing on looked like hell)
- Added two Weapon r racing mufflers to exhaust (Just test fitted, needs lots of adjustment. Thats the furthest in they will fit without modifying the rear bumper cover, which I will do next in order to tuck them in another few inches.) http://www.weapon-r.com/products/1928-universal-g5-twin-mini-10x10x4-tip-size-3
- Removed a bad non functional alarm install that was draining the battery
- replaced rotton outer dew wipes. I was able to find a reasonable replacement on JCWhitey for 20$ on sale. Fits great, I did not transfer any of the other hardware from the old dew wipes over as I was pleased with the "holding" ability of just the wipe itself, both with the window up and down.
- fixed incorrect RPM gauge with variable transistor trick http://www.fieros.de/en/articles/tach.html


Things still left to do
- install both front and rear side scoops.
- exhaust leak from trunk side manifold. I can see a few bolts are broken, so thats going to suck to fix.
- s10 break booster. I have the 88 corvette adapters for the calipers but I think I am going to try just the booster first.
- Paint of course.
- Headliner
- JL 6W3 or 8W3 under dash (waiting for a PFF member to finish this underdash setup to sell).

Now some pictures.

Image
Image
Image
Image
Image
Image
Image
Image
Image


Top
 Profile  
 
 Post subject: Re: 88 GT rebuild
PostPosted: Tue Nov 19, 2013 5:53 am 
Offline
Single again

Joined: Sun Nov 10, 2013 11:26 am
Posts: 292
Location: Kitchener, Ontario, Canada
I'm glad that you bought this car and are doing good things to it! I hate to see Fieros at the salvage yard. I see you have a few pieces missing. I can "give you" a spare tire and factory jack. I have a complete interior but it's grey in colour. Let me know if you need anything.


Last edited by Lunatic on Sun Nov 24, 2013 7:10 am, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: 88 GT rebuild
PostPosted: Tue Nov 19, 2013 6:19 pm 
Offline
Guru

Joined: Fri Jan 18, 2013 12:24 pm
Posts: 727
Location: Just North of the GTA, Ontario
COMING along nicely...good jobs :D


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group