G.T. Fieros http://www.gtfieros.com/phpBB3/ |
|
Who needs parts? http://www.gtfieros.com/phpBB3/viewtopic.php?f=9&t=1042 |
Page 2 of 2 |
Author: | BigB [ Tue May 29, 2018 12:49 am ] |
Post subject: | Re: Who needs parts? |
x-thumpr-x wrote: I rebuilt the one in my GT no problem. Hmm, viewing online looked like a very complicated procedure. Guess I'll look again. Thanks Adam. |
Author: | BigB [ Tue May 29, 2018 2:25 am ] |
Post subject: | Re: Who needs parts? |
Found a youtube feed and looks a little clearer. Did you need to purchase the pressure plate compressor and the lock-pin removal tool, or were you able to use something else? |
Author: | x-thumpr-x [ Tue May 29, 2018 8:41 am ] |
Post subject: | Re: Who needs parts? |
BigB wrote: Found a youtube feed and looks a little clearer. Did you need to purchase the pressure plate compressor and the lock-pin removal tool, or were you able to use something else? Bought the one tool to remove the ring clip, made my own to remove the two side pins. |
Author: | BigB [ Thu May 31, 2018 10:18 pm ] |
Post subject: | Re: Who needs parts? |
Well, I was quite successful in pulling the steering column apart. Yes the inner bolts are a bit loose but is not my issue. The column base in which the bolts attach is cracked at the back and thus, unless I get it welded, she's a goner. So you have a manual column available? When you heading out to the unit next? |
Author: | x-thumpr-x [ Fri Jun 01, 2018 5:58 am ] |
Post subject: | Re: Who needs parts? |
BigB wrote: Well, I was quite successful in pulling the steering column apart. Yes the inner bolts are a bit loose but is not my issue. The column base in which the bolts attach is cracked at the back and thus, unless I get it welded, she's a goner. So you have a manual column available? When you heading out to the unit next? I'm heading to storage unit on Saturday. |
Author: | jjd2296 [ Sat Jun 02, 2018 8:21 am ] |
Post subject: | Re: Who needs parts? |
Check for that manifold heat shield |
Author: | x-thumpr-x [ Sat Jun 02, 2018 5:25 pm ] |
Post subject: | Re: Who needs parts? |
jjd2296 wrote: Check for that manifold heat shield Hey there, I couldn't find it. it's either gone already or buried in the other unit which is a total mess right now. |
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |