G.T. Fieros
http://www.gtfieros.com/phpBB3/

Anyone cutting up an '88?
http://www.gtfieros.com/phpBB3/viewtopic.php?f=9&t=1058
Page 1 of 1

Author:  Lunatic [ Mon Feb 05, 2018 7:01 am ]
Post subject:  Anyone cutting up an '88?

Anyone out here cutting up an '88?
I'm in dire of need one piece. I require the soft, flexible tube/sleeve that covers the steering shaft. The one that goes from the rack to the firewall.
Please let me know if you have one.
Thanks guys.

This one is from an '84-'87. I need the '88 piece.
Image

Author:  yamaha94 [ Tue Feb 06, 2018 11:42 pm ]
Post subject:  Re: Anyone cutting up an '88?

Hey buddy - guyfer auto wreckers in Caledon has an 88 on the lot! go check it out it may still be there. Its black and it's rotten out.

Author:  OHNIKO [ Tue Mar 06, 2018 7:33 pm ]
Post subject:  Re: Anyone cutting up an '88?

looks like my hot date condom from last weekend lol
fire in the hole!!! ;)

Author:  exST165 [ Sun Apr 22, 2018 9:39 pm ]
Post subject:  Re: Anyone cutting up an '88?

Marcus / Yamaha,
Do you think the rear cradle would be salvageable?

Thanks,
Thomas

Author:  x-thumpr-x [ Tue Apr 24, 2018 5:20 pm ]
Post subject:  Re: Anyone cutting up an '88?

exST165 wrote:
Marcus / Yamaha,
Do you think the rear cradle would be salvageable?

Thanks,
Thomas


The rear cradle on the junkyard 88 is toast, not much left of it unfortunately. Looks like it was sitting there for a while, I didn't even attempt to remove the calipers, the rear still have the e brake locked on so I bet they are garbage by now rooting away.

Author:  exST165 [ Tue Apr 24, 2018 11:05 pm ]
Post subject:  Re: Anyone cutting up an '88?

That’s unfortunate that the cradel is shot. But the rear spindles would be interesting if earlier axles can bolt into them.

Author:  x-thumpr-x [ Wed Apr 25, 2018 7:59 am ]
Post subject:  Re: Anyone cutting up an '88?

exST165 wrote:
That’s unfortunate that the cradel is shot. But the rear spindles would be interesting if earlier axles can bolt into them.


There is no spindles on the rear, but there are knuckles but they only work with the 88 suspension set up.

Author:  Stinger [ Mon Jun 25, 2018 9:53 pm ]
Post subject:  Re: Anyone cutting up an '88?

If you haven't found the part you were looking for, a perfect one is now on e-bay for sale here:

https://tinyurl.com/y7gmen6r

Hope this helps...

Stinger

Author:  Lunatic [ Fri Jun 29, 2018 6:51 pm ]
Post subject:  Re: Anyone cutting up an '88?

Stinger wrote:
If you haven't found the part you were looking for, a perfect one is now on e-bay for sale here:

https://tinyurl.com/y7gmen6r

Hope this helps...

Stinger


Uh, your link clearly states the piece was removed from an '86. It is different and will not work. I'll have to get one from the Fiero Farm and get it shipped to me.

Author:  Stinger [ Fri Jun 29, 2018 9:16 pm ]
Post subject:  Re: Anyone cutting up an '88?

Lunatic wrote:
Stinger wrote:
If you haven't found the part you were looking for, a perfect one is now on e-bay for sale here:

https://tinyurl.com/y7gmen6r

Hope this helps...

Stinger


Uh, your link clearly states the piece was removed from an '86. It is different and will not work. I'll have to get one from the Fiero Farm and get it shipped to me.



oops... read the title that said fits "84 88 Pontiac Fiero Lower Steering Shaft & Firewall Seal" without reading taken from and 86..sry bout that.

I'll keep looking.

Author:  x-thumpr-x [ Wed Jul 04, 2018 9:11 am ]
Post subject:  Re: Anyone cutting up an '88?

There is an 88 siting in Guyfer Auto wreckers.

http://guyferauto.com/

Author:  Stinger [ Wed Jul 04, 2018 10:13 pm ]
Post subject:  Re: Anyone cutting up an '88?

Just for fun, I took you link you provided and looked up steering column. It says they have it in stock, so maybe they have the part you need.


https://i.gyazo.com/21bb4a65a74241e572d ... 3a2149.png

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/