OK here we go with list number TWO. Figured it would be easier this way so people don't have a huge load of images to down load.
Also used the thumbnail links this time around.
Brand New 2.8L head gasket
Ignition coil heat shield
Metal fuels line which connect to fuel rail
87/88 brake booster hose to manifold. Bolt down tab removed for easy access
Harness connector from ignition coil to distributor
Fuel injector harness
2.8L engine shock support. Sit on front side of engine under the A/C
2.8L vacuum hose set
Secondary Oil pressure gauge. I built this for my old 2.8L so I can read the oil pressure inside the engine bay. Will only work if your car does NOT have A/C
Decklid springs
87/88 brake booster vacuum line that runs inside your car under the skeleton.
TWO D plates for aero nose. Both need refinishing, one is in better shape then the other.
2000+ Grand Am axels
Fiero Manual Axels. Picture of passenger shaft, Driver side will be out of the donor car soon, holding wheel bearing together right now.
Pending sale
Dog bones, one 4 cylinder (84-86) , other V6 (85/86) both need bushings, red one is powder coated I believe.
Stock muffler springs and bracket supports.
84-87 ebrake brackets
3 sets of Notchback tail lights. Two sets 8/10, other set ok condition. Someone tried to tint them.
NGK wires for 2.8L wires in good shape from my old daily driver. Replaced shortly before my piston rings gave up on the engine.
I have two maroon Notchback clips
I have three Notchback decklids. One in picture come is 87, comes with the wing. Second one 87 maroon also, no wing or luggage rack. Third decklid is red with luggage rack from 86 Fiero.
I also have three hoods available, two maroon, one silver.
Login
FAQ
Search
